2/26/2023 0 Comments Attwood battery box![]() ![]() ![]() The positive terminal should be insulated to prevent accidental shorting.ĬAUTION Overtightening the bolts could damage the threads or damage the crossbar. Connect the battery cables, following the battery manufacturer’s requirements for correct installation.Tighten moderately until bolts and/or crossbar bend slightly. Install the battery retainer and bolts.The bolts fit tightly to prevent them from becoming lost when changing batteries. Thread a bolt into the crossbar on each side.Meets ABYC standard E-10 and coast guard specification 183.420 as an OEM installed battery hold-down system. This vented battery box features polypropylene construction. Fasten down the tray using the #10 screws and washers. All-Purpose Fiberglass Resin 25.38 Product Overview The Attwood Power Guard 27 Vessel Battery Box holds series 27 batteries with a 10-1/2 in.Do not drill through the bottom of the boat. Drill eight pilot holes for the screws.You may wish to further secure the tray with additional screws. ![]() It is recommended that you use the mounting holes closest to the retaining bolt threads, if possible.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |